| Green School and University Virtual Conference and Expo
|
| Presented by American School & University magazine and sponsored by Johnson Controls, Green School & University is a free virtual conference and exposition that will be held online Wednesday, June 24, from 10:30 a.m. to 6 p.m. EST. [MORE] |
| ASHRAE Seeks Applicants for DOE Fellowship
|
| Members of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) looking to assist with national energy-code deployment and compliance can apply for a new ASHRAE-sponsored fellowship. [MORE] |
| AMCA International Votes Down Scheduled Assessment Increase
|
| The Air Movement and Control Association International Inc. (AMCA International) Board of Directors has reviewed the current dues structure and decided there will be no cap-assessment increase on July 1, 2009. [MORE] |
| A/E Firms Still Planning for Mergers/Acquisitions Activity
|
| Seventy-one percent of architecture, engineering, and environmental consulting firms plan to conduct a merger or acquisition in the next five years, according to “2009 Merger & Acquisition Survey of Architecture, Engineering, Planning & Environmental Consulting Firms,” a recent study by ZweigWhite, a source of business-management services for architecture, engineering, and environmental-consulting firms. Promises of geographic expansion and adding new clients are motivating potential buyers to grow through acquisition, the survey found. With firm valuations down from their pre-recession highs and firm owners of the baby-boom generation nearing retirement age, many firms are finding that this is an opportune time to buy. [MORE] |
| EGB Now Part of HVACR Week!
|
HPAC Engineering's Engineering Green Buildings Conference & Expo, along with HVAC Comfortech and the new Commercial HVACR Symposium, will be part of the first annual HVACR Week, which will be held September 21-26 at the Nashville Convention Center in Nashville, Tenn.
This new mega-event will cover the gamut of the HVACR industry under one roof: from design to installation to maintenance and service.
HVACR Week 2009 brings together three events to create a single, comprehensive industry expo. Residential and commercial HVACR contractors will team with designing/specifying engineers to learn about the latest trends in the industry and the best business-improvement tactics. Plus, the top manufacturers and industry suppliers will be on hand to show off their latest products and services.
EGB – Energy Efficiency for Greener Non-Residential Buildings
Produced and managed by HPAC Engineering, the Engineering Green Buildings Conference & Expo is the only green-design event focused on green engineering applications as they apply to mechanical systems for commercial, industrial, institutional, and government buildings.
EGB 2009 – the sixth annual Engineering Green Buildings Conference & Expo – will offer technical sessions on green design and energy savings for non-residential buildings, with an emphasis on government, school/university and health-care applications. Attendees will discover how they can design greener, more-energy-efficient mechanical systems that save energy and money and reduce the carbon footprint of the buildings they serve. Stay tuned for more details. |
 | May 13, 2009 |
| How Does Your Data Center Measure Up?
By PAUL MATHEW, PhD, STEVE GREENBERG, PE, SRIRUPA GANGULY, DALE SARTOR, PE, and WILLIAM TSCHUDI, PE, Lawrence Berkeley National Laboratory, Berkeley, Calif.
|
Data centers are among the most energy-intensive types of facilities, and they are growing dramatically in terms of size and energy intensity.1 As a result, there has been increasing interest on the part of stakeholders—ranging from data-center managers to policymakers—over the last few years to improve data-center energy efficiency. Several industry and government organizations have developed tools, guidelines, and training programs to help work toward this goal. [MORE] |
| | |
 |
| High-efficiency boilers
Bryan Steam's HE-AB series of forced-draft, gas-fired "flexible watertube" water boilers features efficiency of 85 percent. The high combustion efficiency results from an integrated extended-surface heat extractor, which is supported by 7 sq ft of heating surface per boiler horsepower. The boilers operate at normal operating temperatures and without the challenges of special venting or condensing material. The boilers are available in six models, ranging from 900-MBH to 3,000-MBH inputs. The flexible-watertube design provides fast internal circulation and eliminates damage from thermal shock and stresses caused by poor or unequal internal circulation. Visit http://www.bryanboilers.com/
--Bryan Steam LLC |
|
| Low NOx Condensing Boiler
AERCO has re-designed its two-million BTU/hour Benchmark 2.0 Low NOx condensing boiler to reduce its footprint (79"H x 28"W x 36"D), electrical consumption (120V) and gas pressure requirements (4") while maintaining unmatched 20:1 turndown to maximize fuel savings. Engineers and contractors can employ the environmentally-friendly, high-efficiency boiler in a wider variety of hydronic heating applications due to the new design. Visit http://www.aerco.com/pac for more information.
--AERCO |
|
| True GREEN Savings EXHAUSTO's DCV systems offer true energy savings for clothes dryer, bathroom and kitchen exhaust system. Available and installed for decades real savings have been documented. Advantages include: - Pay-back of less than 12 months and a huge Return on Investment.
- Big energy savings
- Saves valuable floor space
- Quick and easy to install.
- Perfect for renovation projects
- Ultra quiet operation
Contact us for cost and savings estimates – it's never too early to start saving.
For more information call (800) 255-2923 or visit us.exhausto.com. |
|
| Protect valves and condition flow from the pump – Free White Paper
Condition flow immediately as it leaves the pump. Stop turbulence from damaging valves, creating valve chatter, damaging valves, and impacting the balance in your engineered pipe system. The Vane Flex is a simple flow conditioning joint installed immediately after the pump that immediatly smooths flow exiting the pump so it enters the valve with a flat velocity profile. It allows you to make even more compact designs while maintaining the integrity of your design. Click here for free white paper.
--Metraflex |
|
| Commercial Comfort Systesms
The Commercial Comfort Systems Series 10 is a light-commercial unit featuring energy-efficiency ratings up to 11.5 EER. Overhead rigging and a full-perimeter base rail for three-way forklift access simplify installation. Two compressors and independent refrigeration circuits ensure reliability, and foil-faced insulation improves air quality. Available in cooling-only, cooling with electric heat, and cooling with gas heat.
Click here for more information on Building Efficiency.
--Johnson Controls
|
|
As today's building projects increase in complexity, communicating designs and design changes among mechanical, electrical, and plumbing (MEP) engineers and their extended teams, including architects and structural engineers, becomes more important. If you're a MEP designer or engineer, our webcast series featuring AutoCAD MEP and Revit MEP will help you improve productivity, accuracy, and coordination. Register now. |
|
FanDrafter for Autodesk® Revit® 2009
Autodesk® Revit® families are available for every model and configuration of product from Loren Cook, one of the largest manufacturers of industrial and commercial fans and blowers in the world. Each 3D parametric family is a full-scale representation of the product and contains all sizes available for that model. Each family includes information on duct connection size, electrical connection location, mounting holes (where applicable) as well as user defined attributes for airflow, static pressure, RPM, horsepower, voltage, phase and more. Click here to access Loren Cook FanDrafter and library of Revit® files |
|
| The Perfect Storm The Perfect Technology Storm white paper from Johnson Controls discusses the advancements in the development of technology, standardization, and expertise and how these technologies are combining to unleash opportunities like never before for Facility and IT managers to improve building and business performance...MORE |
|
| Contact information: Kate Hoban, HPAC Engineering Thank you for reading HPAC Engineering's FASTRACK e-newsletter.
You've received this e-newsletter for one of three reasons:
1) You signed up for it on the HPAC Engineering Website.
2) You received the HPAC Fastrack e-newsletter in the past.
3) You identified yourself as a reader of HPAC Engineering magazine. Manage Your Subscription
To subscribe: Subscribe
To unsubscribe: Unsubscribe
To change your e-mail address:
Send an email to change, and include your old address, as well as your new address. 2009 Penton Media, Inc. All rights reserved. Privacy Statement |
|
